For new forklifts or forklifts that have stopped working for a long time, within two weeks after starting to use, for bearings that should be lubricated, new oil should be used to squeeze out all the old oil and lubricate it more than twice. At the same time, pay attention to the following points.
1. Before lubrication, the dirt on the oil cap, oil plug and oil nozzle shall be removed to prevent the dirt from falling into the mechanism.
2. When injecting lubricant with a grease gun, it shall be injected until the parts of each component combine to extrude lubricant.
3. Seasonal lubricants should be replaced in summer or winter.
4. Colleagues in lubrication can check whether the bearing ball is loose or the inner ring is deformed.
As for the choice of bearing replacement, at present, imported brands such as Japan NSK and Germany fag are recommended in the market, while domestic brands depend on the products that buyers are more used to.
I hope this blog is helpful. Please click here for more about our forklift parts.